|

Molded case circuit breaker TEM1 |
TEM1 series molded case circuit
breaker (hereinafter referred to as breaker)
is suitable for AC 50Hz or 60Hz circuits with
a rated insulation voltage of 690V, rated working
voltage of 690V and below, and a rated current
from 10A to 800A, it is used for infrequent
circuit conversion and infrequent motor starting.
This series of circuit breakers are equipped
with overload, short circuit and under voltage
protection devices, they can protect power lines
and equipment from damage. Product Standard:
GB14048.2 "low-voltage switchgear and control
equipment" |
|
|

Intelligent universal circuit breaker TEW1 |
TEW1 series intelligent universal
circuit breaker (hereinafter referred to as
breaker) is suitable for AC 50HZ power distribution
network with a rated voltage up to 600W (690V),
rated current of 630A-6300A, it is used for
power distribution and protection of circuit
power supply from damages by such problems as
overload, under voltage, short circuit, single-phase
grounding etc. This circuit breaker has intelligent
protection function, for precise selective protection,
can improve power supply reliability, to avoid
unnecessary power outages. At the same time,
it has an open communication interface. It has
"four-remote control" function to
meet the requirements of control centers and
automation systems. The circuit breaker has
an impulse withstand voltage of 8000V at an
altitude of 2,000 meters (can be adjusted according
to the standard for different altitudes with
a maximum value of 12000V). The circuit breaker
has no intelligent controller and sensor and
can be used for isolation, marked as _ ???
The circuit breaker conforms to GB14048.2 "low
voltage circuit breakers for low-voltage switchgear
and control equipment" and IEC60947-2 "Circuit
breakers for low-voltage switchgear and control
equipment" and other relevant standards. |
|
|
|